Intelli-M PoE
Power over Ethernet

Security made truly simple.

Introducing Intelli-M PoE, Integral Technologies' newest access control system. Intelli-M PoE takes advantage of emerging technologies utilizing the Ethernet to carry both power and data to the door controller. The unique design and size of Intelli-M PoE allow for easy installation in a standard double gang box. Using the mounting plate provided, the eIDC snaps into two different positions for easy wiring. Maintenance and diagnostics are incredibly fast and simple using the light configuration on the front of the unit, saving users time and money.

THIS IS YOUR NEW CARD ACCESS SYSTEM  - PRETTY MUCH ALL OF IT!

Intelli-M's eIDC contains an embedded Web server. For stand-alone applications requiring only one door of access control, the embedded Web server allows users to easily connect and manage their single door system from anywhere in the world using most common Web browser software via the Internet. For projects that require multiple doors, the Web server can be used during system commissioning, significantly reducing the set-up time required to program the system.

The Intelli-M system is fully integrated with Integral's digital video management solutions to provide a combined access control and digital video solution for complete facility security.

There are many benefits in eIDC solution, here are some:

• It is smallest fully featured card access controller on the market. 1.7x2.82x1.3 INCH (WxHxD)
• It is one of the most economical "out of the box" one door controllers on the market!
• It fits standard double gang electrical box.
• It is Ethernet enabled.
• It is PoE enabled (Power over Ethernet).
• It will power up readers, door lock and other peripherals. 12VDC 1A available.
• It has WEB interface embedded, no extra software required.
• It has DHCP server built-in. No problems with IP addresses.
• When powered up it actually shows you selected IP address using on board LED's.
• It will control one door in and out.
• It will continue working in peer to peer configuration if server goes down.
• Buy it in kit or in pieces. Typical kits below.
• Add reader and door strike and that is all for working system. Can't be simpler then that!
• Supports local data base of 10000 cards holders, or up to 64000 cardholders when Supervisor Plus software is used.
• Supports 16000 local event buffering.
• Perfect for one door or few doors systems. If you want to go big, there is no limit to number of IDC controllers used.
• Perfect for elevator control.
• Easy to go CCTV integration with Integral Technologies DVR's.
• For complete control use Supervisor Plus software.
• Uses standard HID proximity cards and readers.
• For higher security use proprietary proximity smart card readers and cards. They cost less then you expected.
• All smart cards are printable.
• All smart cards have unique numbers that never repeat.
• Easy to use and inexpensive smart card/keypad readers.
• It is easy to add another door, you are not limited to usual 2 or 4 door controllers.
• It is really easy to program and use using your standard WEB browser.
• It has built-in control buzzer.
• It has 3 ways to power it up: PoE, power injector module or standard power 24VDC
• ...more

You can buy eIDC in pieces building your own card access system or by taking one of the kits below. Also, same kits available with smart card readers and smart cards for small difference in price:

ACCESS KIT FOR ONE DOOR BASED ON PoE

ACCESS KIT FOR ONE DOOR BASED ON REGULAR POWER SUPPLY

See brochures HERE!